Ecologic® Ultra Low VOC 100% Acrylic Latex Finish
An ultra-low-VOC waterborne low-gloss finish for interior and exterior repainting. It provides a non-yellowing, scrubbable coating for institutional and light industrial areas.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
An ultra-low-VOC waterborne low-gloss finish for interior and exterior repainting. It provides a non-yellowing, scrubbable coating for institutional and light industrial areas.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 70683 |
|---|---|
| Sheen | Low Gloss |
| Category | Interior Topcoat / Exterior Topcoat |
| Chemistry | 100% Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 35% |
| Weight solids | 48% |
| Density | 10.32 lbs per gallon. Container extra |
| Film thickness | Wet: 4.3 - 5.7 mils (110 - 150 microns) Dry: 1.5 - 2.0 mils (38 - 50 microns) |
| Viscosity | 98 - 102 KU |
| Thinning | Not normally recommended, sparingly with water for spray applications |
| Cleanup | Warm, soapy water |
| Shelf life | 3 year maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Ecologic® Ultra Low VOC 100% Acrylic Latex Finish, Low Gloss
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 70681 - Interior - Exterior, 100% Acrylic Latex Low Gloss Finish Deep Base (English)
Product safety and handling information.
SDS - 70683 - Interior - Exterior, 100% Acrylic Latex Low Gloss Finish (English)
Product safety and handling information.
SDS - 70684 - Interior - Exterior, 100% Acrylic Latex Low Gloss Finish Neutral Base (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
LEED HPD Doc
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Product images are shown for reference; packaging and options may differ from your selection.
Full product details, applications & manufacturer specifications
An ultra-low-VOC waterborne low-gloss finish for interior and exterior repainting. It provides a non-yellowing, scrubbable coating for institutional and light industrial areas.
Where to use it
Previously painted surfaces, drywall, concrete block, masonry, composite siding and wood, subject to the manufacturer’s preparation requirements.
Recommended uses
Previously painted surfaces, drywall, concrete block, masonry, composite siding and wood, subject to the manufacturer’s preparation requirements.
Cabinetry Commercial Exterior & decks Exterior surfaces Interior walls Residential Trim, doors & windows- Finish
Low Gloss
- Coverage
280 - 374 ft² per gallon (6.9 - 9.2 m²/L)
- Application method
Brush: Use a polyester brush Roller: Use a 10 - 20mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .011” - .015”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 30 minutes
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 6 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Low-VOC formulation.
- Can function as its own primer where the technical sheet permits.
- Water-based formulation.
- Product Code
- 70683
- Sheen
- Low Gloss
- Category
- Interior Topcoat / Exterior Topcoat
- Chemistry
- 100% Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 35%
- Weight solids
- 48%
- Density
- 10.32 lbs per gallon. Container extra
- Film thickness
- Wet: 4.3 - 5.7 mils (110 - 150 microns) Dry: 1.5 - 2.0 mils (38 - 50 microns)
- Viscosity
- 98 - 102 KU
- Thinning
- Not normally recommended, sparingly with water for spray applications
- Cleanup
- Warm, soapy water
- Shelf life
- 3 year maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Start with a few colour references, then explore the full collection.
Cloverdale Paint
Colour collection
Touch of Sun · 0852Color Is
Silent Sea · 0515Color Is
Zambia · 0963Color Is
Cyan Sky · 0681Color Is
Teen Queen · 1171Color Is
Party Time · 1109Color Is
Andes Sky · 0680Color Is
Sun's Glory · 0841Color Is- Sheen
- Low Gloss
Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample.
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
Cut in edges and paint trim with an angled synthetic brush.
Choose the brush size for the work and follow the paint’s application directions.
Micro Pro®
An applicator option for rolling larger painted surfaces.
Choose the roller width and nap for your surface and the paint’s application directions.
Bennett Cotton Canvas Drop Cloth · 3 × 20 ft
Protect the work area while painting walls, ceilings or trim.
Choose enough drop cloths to cover the area around your project.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Ecologic® Ultra Low VOC 100% Acrylic Latex Finish