Professional Finishes Pre-catalyzed WB Epoxy
A single-component, pre-catalyzed waterborne acrylic epoxy for interior applications. This pearl finish combines washability and scrub resistance with resistance to abrasion, stains and chemicals.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A single-component, pre-catalyzed waterborne acrylic epoxy for interior applications. This pearl finish combines washability and scrub resistance with resistance to abrasion, stains and chemicals.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 77853 |
|---|---|
| Sheen | Pearl or Satin |
| Category | Interior Topcoat |
| Chemistry | Acrylic Epoxy |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 33% |
| Weight solids | 45.0% |
| Density | 10.22 |
| Film thickness | Wet: 4.2 - 6.0 mils (106 - 152 microns) Dry: 1.4 - 2.0 mils (36 - 51 microns) |
| Viscosity | 100 - 110 KU |
| Thinning | Not normally recommended, sparingly with water for spray applications |
| Cleanup | Warm, soapy water |
| Shelf life | 2 year maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
Professional Finishes Pre-catalyzed WB Epoxy, Pearl
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
SDS - 77851 - Pre-catalyzed WB Epoxy Pearl Deep Base (English)
Product safety and handling information.
SDS - 77853 - Pre-catalyzed WB Epoxy Pearl (English)
Product safety and handling information.
SDS - 77854 - Pre-catalyzed WB Epoxy Pearl Neutral Base (English)
Product safety and handling information.
Sell Sheet (English)
Read the manufacturer’s instructions and product information.
LEED CDPH Certificate
Read the manufacturer’s instructions and product information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Product images are shown for reference; packaging and options may differ from your selection.
Full product details, applications & manufacturer specifications
A single-component, pre-catalyzed waterborne acrylic epoxy for interior applications. This pearl finish combines washability and scrub resistance with resistance to abrasion, stains and chemicals.
Where to use it
Prepared interior substrates covered by the manufacturer’s coating-system instructions.
Recommended uses
Prepared interior substrates covered by the manufacturer’s coating-system instructions.
Commercial Concrete & masonry Drywall Interior walls Residential- Finish
Pearl or Satin
- Coverage
263 - 376 ft² per gallon (6.67 - 8.9 m²/L)
- Application method
Brush: Use a polyester brush Roller: Use a 5-10mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure. 1.3 tip Airless Spray: Pressure 2000 psi, Tip .013” - .019”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 1 hour
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 4 Hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
Features
- Low-VOC formulation.
- Resists chemical exposure within the limits stated in the technical sheet.
- Designed to withstand abrasion.
- Water-based formulation.
- Product Code
- 77853
- Sheen
- Pearl or Satin
- Category
- Interior Topcoat
- Chemistry
- Acrylic Epoxy
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 33%
- Weight solids
- 45.0%
- Density
- 10.22
- Film thickness
- Wet: 4.2 - 6.0 mils (106 - 152 microns) Dry: 1.4 - 2.0 mils (36 - 51 microns)
- Viscosity
- 100 - 110 KU
- Thinning
- Not normally recommended, sparingly with water for spray applications
- Cleanup
- Warm, soapy water
- Shelf life
- 2 year maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Start with a few colour references, then explore the full collection.
Cloverdale Paint
Colour collection
Touch of Sun · 0852Color Is
Silent Sea · 0515Color Is
Zambia · 0963Color Is
Cyan Sky · 0681Color Is
Teen Queen · 1171Color Is
Party Time · 1109Color Is
Andes Sky · 0680Color Is
Sun's Glory · 0841Color Is- Sheen
- Pearl or Satin
Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about Professional Finishes Pre-catalyzed WB Epoxy