WeatherOne® CoverCoat 100% Acrylic Exterior Finish
A flat acrylic exterior paint for stucco, masonry, primed wood and properly prepared metal.
Protective coatings.
Local knowledge.
KNOW THE
SURFACE.
PLAN THE
COATING.
A flat acrylic exterior paint for stucco, masonry, primed wood and properly prepared metal.
Start with the surface, the existing finish and the way the space or equipment is used. Our team can help you work through product choices and the requirements for your project.
Get into the details
The surface.
Identify the material, its condition and the work you’re planning.
The system.
Confirm product suitability, preparation and compatibility with our team.
The conditions.
Check the current manufacturer instructions for application, installation or maintenance requirements.
THE DETAILS.
ALL HERE.
Keep the technical information close.
Use the current manufacturer documents when planning the work.
| Product Code | 02203 |
|---|---|
| Sheen | Flat or Matte |
| Category | Exterior Topcoat |
| Chemistry | 100% Acrylic Latex |
| Catalogue range | Architectural / wood finishing |
| Volume solids | 36% |
| Weight solids | 49% |
| Density | 10.67lbs per gallon. Container extra |
| Film thickness | Wet: 4.2 - 5.6 mils (105 - 138 microns) Dry: 1.5 - 2.0 mils (38 - 50 microns) |
| Viscosity | 95 - 100 KU |
| Thinning | Not normally recommended, sparingly with water for spray applications |
| Cleanup | Warm, soapy water |
| Shelf life | 3 year maximum, unopened |
| Storage conditions | 4°C (40°F) - 32°C (90°F) Keep from freezing |
KNOW BEFORE
YOU COAT.
Technical information.
Safety information.
Ready when you need it.
WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat
Technical Data Sheet (English) · manufacturer download page
Read the full product requirements, application instructions and limitations.
Technical data sheet – Sell Sheet (English)
Read the full product requirements, application instructions and limitations.
SDS - 02007 - WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat (GL1) Black (English)
Product safety and handling information.
SDS - 02201 - WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat (GL1) Deep Base (English)
Product safety and handling information.
SDS - 02203 - WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat (GL1) (English)
Product safety and handling information.
SDS - 02204 - WeatherOne® CoverCoat 100% Acrylic Exterior Finish, Flat (GL1) Neutral Base (English)
Product safety and handling information.
Check the product label and current manufacturer documents for the exact component, colour and region before use.
Product images are shown for reference; packaging and options may differ from your selection.
Full product details, applications & manufacturer specifications
A flat acrylic exterior paint for stucco, masonry, primed wood and properly prepared metal.
The low-reflection finish helps disguise uneven or textured surfaces. It provides strong hiding and allows moisture vapour to pass through the coating. Application is permitted from 5°C under suitable conditions; vinyl colour choices and cedar priming have additional restrictions.
Exterior project planning
- Air temperature
- At least 5°C
- Surface temperature
- Check manufacturer instructions
- Conditions after application
- 4 hours
Apply at air temperatures of at least 5°C. Do not apply above 85% relative humidity or when temperatures are forecast to fall below 5°C within 4 hours after application. Use a clean, dry, properly prepared surface. No maximum air temperature, separate surface-temperature bound or numeric rain-free period is specified in the current English TDS. Drying times are given at 25°C and 50% relative humidity, which are reference conditions rather than an ideal application temperature.
Check the air, the actual surface, overnight conditions and the full drying or curing period. The current product label takes precedence.
Recommended uses
For exterior topcoat applications. Check the technical sheet for the supported substrates, required preparation and compatible coating system.
Exterior & decks Exterior surfaces- Finish
Flat or Matte
- Coverage
290 - 390 ft² per gallon (7.1 - 9.6 m²/L)
- Application method
Brush: Use a polyester brush Roller: Use a 10 - 20mm nap synthetic cover H.V.L.P Spray: 10 psi cap pressure 1.3 tip size Airless Spray: Pressure 2000 psi, Tip .013” - .017”
- Drying time
at 25°C (77°F) and 50% Relative Humidity Tack Free: 1 hour
- Recoat time
at 25°C (77°F) and 50% Relative Humidity Re-Coat: 4 hours
Use the sheet for your exact product code and finish. Coverage and times depend on the stated temperature, humidity, substrate and coat thickness.
- Product Code
- 02203
- Sheen
- Flat or Matte
- Category
- Exterior Topcoat
- Chemistry
- 100% Acrylic Latex
- Catalogue range
- Architectural / wood finishing
- Volume solids
- 36%
- Weight solids
- 49%
- Density
- 10.67lbs per gallon. Container extra
- Film thickness
- Wet: 4.2 - 5.6 mils (105 - 138 microns) Dry: 1.5 - 2.0 mils (38 - 50 microns)
- Viscosity
- 95 - 100 KU
- Thinning
- Not normally recommended, sparingly with water for spray applications
- Cleanup
- Warm, soapy water
- Shelf life
- 3 year maximum, unopened
- Storage conditions
- 4°C (40°F) - 32°C (90°F) Keep from freezing
Colours &
finish options.
Start with a few colour references, then explore the full collection.
Cloverdale Paint
Colour collection
Touch of Sun · 0852Color Is
Silent Sea · 0515Color Is
Zambia · 0963Color Is
Cyan Sky · 0681Color Is
Teen Queen · 1171Color Is
Party Time · 1109Color Is
Andes Sky · 0680Color Is
Sun's Glory · 0841Color Is- Sheen
- Flat or Matte
Screen colours are approximate. These are collection references; colour and tint-base availability can vary by product. Confirm the colour and finish with our team and a physical sample.
Complete your project.
Companion products for the selected product and system.
Bennett MP-X 2.5-inch Angular Sash Brush
Cut in edges and paint trim with an angled synthetic brush.
Choose the brush size for the work and follow the paint’s application directions.
Micro Pro®
An applicator option for rolling larger painted surfaces.
Choose the roller width and nap for your surface and the paint’s application directions.
Bennett Cotton Canvas Drop Cloth · 3 × 20 ft
Protect the work area while painting walls, ceilings or trim.
Choose enough drop cloths to cover the area around your project.
Explore related categories
BIG PROJECT?
LET’S TALK.
Share the surface, its condition and what it needs to stand up to. We’ll help you work through the product choices and preparation.
Ask about WeatherOne® CoverCoat 100% Acrylic Exterior Finish